Step X Step

HI its Em again! How is the week all treating you?? Today I am going to share with you a step x step for a recent layout, one of my favourite layouts I have done lately actually.

Here it is, titled ‘Sydney snaps’  I have used 3 pieces of WOW chipboard & an AltaMATZ on this layout.  ok here we go…..

First up I took a 12 x 12 piece of Black cardstock and used mister hueys Calico White spray with the AltaMATZ 12 x 12 chicken wire (ALTA016) and spritzed lightly.

Next I prepared my Title chippy, the original piece says Sydney harbour bridge (RWL416), I decided I just wanted to use the sydney part of the title.

So I used a craft knife and carefully cut off the harbour bridge part (I popped these pieces back in my chippy stash to be used at a later date)

I then inked the sydney part & outlined the title with white pen

Next up I sprayed My film strip (C428) chippy with calico white & sunshine mr hueys.

I then used some orange paint and randomly smeared it on my cardstock.

Then tear 2 strips of pattern paper roughly 15cms long & 2-2 1/2 cms wide, distress & Ink.  Adhere the strips to the cardstock, the first one roughly 9cms from the bottom edge of cardstock, then the 2nd pattern paper overlapping the top of the first piece of pattern paper.

Adhere the film strip on a slight angle 6cms from the bottom edge of the cardstock.

sand around the edges of your photo strips for a more distressed look, then adhere them with puffy tape side by side but slightly angled and on top of the film strip chippy.

Add your chippy title with puffy tape to the left & bottom of the left photo strip

finish your title off by adding alpha stickers etc if you wish/need to

add any other embellishments/journaling you would like, just to finish off your page. I have added a couple of stickers, some journaling and a WOW butterfly (RWL104)

And another look at the finished layout.

Thanks for stopping by and checking out my step x step, I shall be back tomorrow with another layout to share.

Em

OTP

Hi there everyone!

Today I have an of the page project to share with you. Here I am using the round doily frame (M192)

I have used a range of other WOW chipboard as well.  Family Title(RWL361), card size-padlocks, keys & keyholes(C1097), heart banner(C1434), peacock feather(WOW1561), leaf pack(C1136),flourish.

Thanks for dropping in again today! Don’t forget I have the blog all week.  More to come.

Em

July new release from Em

Hi I got the pleasure of playing with the COG & GEAR FLOURISH CORNER SMALL (WOW1514) I have also used the plain cog pack (C729) to build my cog corner up to look 3D.  I simply coloured these pieces in with pens & inks & outlined them with white pen.  I also used  AltaMATZ REVERSE COG TEMPLATE SMALL and used it as a template with a white pen to add a cog border around the pattern paper.

I hope you enjoy the new releases for July, I know I do!
Also Ive got the blog all week this week so stay tuned I will have some more Emma goodness to share with you!
Em

New Release July–Wendy Smith

A New Month and a whole heap of NEW RELEASES for you all to play with, and I bet you can't wait to get your hands on them.
 
 
I was lucky enough to receive the "SMALL BIRDCAGES C1541" as my new release for the month.


Here is the layout I have done with them… all I did was colour them with some STUDIO CALICO Mr Huey’s Mists and they came up a treat!

How cute do they look layered up like this….!!!!


not only are birdcages fabulous for Girly pages…but I can also picture them on masculine and vintage ones too!

Cheers and Happy Scrapping
Wendy x x x

New Release–Clock–July-Susan Longman

 

Hi Susan here again…

This month WOW released a fabulous chipboard piece…C1509 CLOCK SMALL… and I have had the opportunity to have a play with it…

To alter the clock I inked it with a marker in the coordinating colour to the papers I used… I am a strong believer that altering chipboard needn’t be involved to have impact.

Have a terrific week

From Susan x

New Release for July - Lisa Warren

This month, I have the joy of playing with WOW's cog frame, which is now available in a smaller size! This frame fits a 4x4 photo perfectly and is a great addition to your next boy inspired layout.

I have spritzed the chipboard in a yellow mist.  Once dry, I added liquid pearl dots to highlight some of the cogs.  To finish the frame, I glued red and white twine around the inside to further showcase my photo and tie in the colours from the rest of the layout.

 

Words or Whatever product used: C1525 SMALL Cog frame

Have a lovely week

From Lisa

New Release–July by San Staples

Hi its San here.......

I was lucky to get the awesome C1519 6x6 Chicken Wire chipboard for my New Release this month. Love the effect this has under my photo. It can also be used as a mask with mists or paint.

This page is of my son, Tom...he has a wonderful sense of imagination, here is his friend 'wilson' that he made one filthy rainy day while we waited under the umbrella for the school bus...its an old tennis ball he picked up on the walk! I have left the chipboard raw.

 

 

 

My other piece of New Release is this awesome C1517 Cog and Gear Corner, they can be cut from large to a 6 inch...very cool for all kinds of photos.

 

 

This is a really old photo of me and dad, washing my mums car out the front of our house. The big paddock is now a primary school that both me and my brother attended. The story goes (according to my mum anyway...that it was probably the first and only time dad ever washed her car, and probably the last time I ever did LOL)

 

The simple effect used here is just some Tim Holtz Vintage Photo ink over the top.

 

 

Have a great week

xxx San xxx